Waterproof 3D Digitizing touch probe for CNC with 8 mm shank, 2 mm ruby ball tip

Description

The 3D Touch Probe is used for measuring workpiece geometries such as edges, holes, grooves, studs, angles and corners or scanning surface. This probe has been developed for high measurement precision and high repeatability.
To achieve a high measurement precision, the touch probe must be mechanically calibrated, so that its axis aligns perfectly with the spindle axis of the machine.
The development of our 3D Touch Probe was focused particularly on achieving an affordable price without sacrificing precision, repeatability and reliability. Furthermore, the 3D Touch Probe is not just a simple switch, but it also includes electronics to ensure a stable and reliable switching behavior.
See probe in action:
link1
link2
link3
link4
Technical Data 3D Touch Probe v2
Sensing directions:
±X; ±Y; -Z
Max. stylus overtravel :
XY = 12
o
;
Z = 3mm [ .118" ]
(new feature)
Trigger force :
XY = 0.5 – 1N ; Z = 2.5N
Repeatability (unidirectional):
under 5μm
(new feature)
with 20mm [ .7874" ] stylus
and max. 50mm/min probing feedrate
Output function:
electronic high-speed switch as (NPN-NC) normally close contact
If you need a different type of output like NPN-NO, PNP-NC or PNP-NO and a different power range, see my other offers.
Gold-plated switch contacts
Switching current:
max. 300 mA
Functional notification:
switching point notification by LED (red)
Operating voltage:
2
– 5,5V DC
Cable length:
2m (with connector)
new feature
Connector:
pull / push 3/4 pin
Body:
aluminium alloy
Tool holder:
with alignment function and 8mm cylindrical shaft
Stylus:
stylus with 2mm ruby ball (included) - Renishaw standard no A-5000-3603
Dimensions (without holder):
(D) 35mm [ 1.3780" ], (H) 33mm [ 1.2992" ], stylus 20mm [ .7874" ] + extension - 20mm [ .7874"]
IP Code:                                           IP64